iSimple PGHFD1 - Manual (Page 15)

13
Changing Bands
Press and hold the SCAN button on the radio to enter the mode select menu. Once
in the mode select menu, turn the Tune Knob until the desired band (“HD-FM1”,
“HD-FM2” or “HD-AM”) is displayed. You can now either wait 6 seconds or press
the SCAN button to enter the mode.
Storing Radio Stations into Preset Memory
Once you have tuned to a station you wish to store as a preset, press and hold
one of the preset buttons (1-6) for longer than two seconds to store the preset into
that location. The screen will display “PR SAVED” and your preset has been stored
into memory.
Recall Stored Preset Stations
Press the Preset Button(1-6) that represents the station stored in memory that you
wish to recall.
The HD Radio will pick up both Digital and Analog radio signals. Multicast HD2
and HD3 stations are digital only, and will not be available if the radio signal is too
far away, causing a weak signal.
iPod Operation
(Non-Navigation Radios)
Press the “AUX” button on the radio until “SYNC” is displayed. Press and hold
the SCAN button on the radio to enter the mode select menu. Once in the mode
select menu, turn the Tune Knob until “IPOD” is displayed. You can now either
wait 6 seconds or press the SCAN button to enter the mode.
Next Track
Press the SEEK► button to advance one song in an Album or Playlist.
Previous Track
Press the ◄SEEK button to move back one song in an Album or Playlist.
Fast Forward
Press and hold Preset # 2 button to Fast Forward the song that is playing.
Rewind
Press and hold Preset # 1 button to Rewind the song that is playing.
Menu Down / Select
Press Preset #4 to make a selection and move through the browse
menu.
Menu UP
Press Preset # 3 to move back one step in the menu.