Using your mp3 speaker system, Inserting an ipod, Connecting an audio device – Insignia NS-IPSD2 User Manual

Page 7: Inserting an ipod connecting an audio device

Advertising
background image

5

Insignia NS-IPSD2 MP3 Speaker System

www.insigniaproducts.com

Using your MP3 speaker
system

Inserting an iPod

To insert an iPod:

1 Make sure that batteries are installed in the

speaker system or the AC power adapter is
connected to the speaker system and a power
outlet.

2 Press the open dock button on the front of your

speaker system to unfold the dock.

3 Select the correct adapter, then insert it into the

iPod dock. Adpaters are labeled with the names
of the iPod models.

4 Insert the iPod into the adapter.

5 Pull the stand out to set the speaker system

upright.

6 Press the power button. The LED lights.

7 Press the volume up or volume down button to

adjust the volume.

8 Press the power button again to turn off your

speaker system.

Connecting an audio device

You can connect an audio device to the AUX in jack.

To connect an audio device:

1 Make sure that batteries are installed in the

speaker system or the AC power adapter is
connected to the speaker system and a power
outlet.

2 Connect a 35mm audio cable to the AUX in jack

on the back of your speaker system and to the
audio out jack on the audio device.

3 Pull the stand out to set the speaker system

upright.

4 Press the power button. The LED lights.

5 Press the volume up or volume down button to

adjust the volume.

6 Press the power button again to turn off your

speaker system.

Notes

Battery life is about eight (8) hours. You can use the
AC power adapter when the batteries are depleted.

Open dock button

Unfolded dock

Notes

Battery life is about eight (8) hours. You can use the
AC power adapter when the batteries are depleted.

Advertising
This manual is related to the following products: