Ironman Fitness Alpine - Manual (Page 7)

7
Assembly
Z1
Figure 3
Step 1:
Attach the right handlebar support (E2) to
the main frame (A) using one bolt (G6).
Step 2:
Secure the right handlebar tube (D2) to
the handlebar support tube (E2) using one
screw (Z1).
Do not tighten hardware until Figure 4
is completed.
Figure 3
Figure 4
Step 1:
Secure the right handlebar (D2) to the
console tube (B) using one bolt (G5).
Attach the end cap (G9) to the unit.
Repeat Figures 3 and 4 using the left
handlebar and left handlebar support
tubes.
Tighten hardware using appropriate tools.
Figure 4