Impex TT-210 - Manual (Page 8)

STEP 2 (See Diagram 2)
A.) Insert one Seat Support (#3) into one end of the Swing Frame (#2). Attach one Handle
Frame (#4) onto the Seat Support. Align the holes. Secure the Handle Frame, Seat Support,
and Swing Frame together with two M10 x 2 5/8” Allen Bolts (#9), four Ø ¾” Bent Washers
(#13), and two M10 Aircraft Nuts (#16).
B.) Place the Seat (#8) onto the Seat Support. Secure the Seat Pad to the front hole with one
M10 x 2 3/8” Allen Bolt (#10), one Ø ¾” Lock Washer (#20), and one Ø ¾” Bent Washer
(#13). Secure the rear hole with one M10 x 3” Allen Bolt (#11), one Ø ¾” Lock Washer
(#20), and one Rubber Bumper (#17).
D.) Repeat Procedure A and B above to install the other Seat.
DIAGRAM 2
7