Positioning the projector – InFocus IN116 User Manual

Page 7

Advertising
background image

6

Positioning the projector

To determine where to position the projector, consider the size and shape of your

screen, the location of your power outlets, and the distance between the

projector and the rest of your equipment. Here are some general guidelines:

Position the projector on a flat surface at a right angle to the screen. IN112

and IN114 must be at least 45.3” (1.2m) from the projection screen, and

IN116 must be at least 55.4” (1.4m) from the projection screen.

If you are installing the projector on the ceiling, we strongly recommend using

InFocus approved ceiling mounts for proper fitting, ventilation and installation.

Refer to the installation guide that comes with the InFocus Ceiling Mount Kit

(p/n SP-CEIL-UNIV) for more information. The warranty does not cover any

damage caused by use of non-approved ceiling mount kits or by installing in an

improper location. To turn the image upside down, see “Ceiling mount” on

page 27. We recommend using an InFocus authorized ceiling mount.

Position the projector the desired distance from the screen. The distance

from the lens of the projector to the screen and the video format determine

the size of the projected image.

The image offset is 115% +/-5%. This means that if you have an image 60

inches (1.5 meters) tall from a table-mounted projector, the bottom of the

image will be 9 inches (22.9 cm) above the centerline of the lens.

60 inches
high image

bottom of image 9
inches above center
of lens

Projection angle

lens center

Table 1: IN112 (SVGA)/IN114 (XGA) Screen size

Diagonal Screen
Size (inches/m)

Size of the
Projected Image
Width
(inches/m)

Distance to screen
Minimum
distance
(inches/m)

Maximum
distance
(inches/m)

30”/0.8m

24”/0.6m

45.3”/1.2m

50.6”/1.3m

60”/1.5m

48”/1.2m

92.2”/2.3m

102.9”/2.6m

80”/2.0m

64”/1.6m

123.5”/3.1m

137.7”/3.5m

100”/2.5m

80”/2.0m

154.8”/3.9m

172.5”/4.4m

150”/3.8m

120”/3.0m

233.0”/5.9m

259.6”/6.6m

Table 2: IN116 (WXGA) Screen size

Diagonal Screen
Size (inches/m)

Size of the
Projected Image
Width
(inches/m)

Distance to screen
Minimum
distance
(inches/m)

Maximum
distance
(inches/m)

45”/1.1m

38”/1.0m

55.4”/1.4m

69.3”/1.8m

60”/1.5m

51”/1.3m

74.5”/1.9m

92.9”/2.4m

80”/2.0m

68”/1.7m

100.0”/2.5m

124.4”/3.2m

100”/2.5m

85”/2.2m

125.5”/3.2m

155.8”/4.0m

150”/3.8m

128”/3.2m

189.2”/4.8m

234.6”/6.0m

Advertising
This manual is related to the following products: