Zyxel N4100 - Manual (Page 6)

6
If no lights are on, check your connections. Make sure that
you have the power adaptor connected to the N4100 and
plugged in to an appropriate power source. Make sure the
power source is turned on. Turn the N4100 off, wait for a few
seconds and turn it back on. If the LEDs are still off, contact
your local vendor.
Web Configurator
This section shows you how to access and log into the Web
Configurator.
1. From the computer connected to the N4100, open a web browser
such as Internet Explorer or Firefox.
2. Enter http://192.168.1.1 (the
N4100’s default LAN IP address) in
the browser’s address bar.
3. Enter admin as the default user name and 1234 as the default
password. Click Login.