ILY Enterprise 3 - Manual (Page 7)

Copyright©2005 ILY Enterprise, Inc. All rights reserved. 7
Hardware Connection with Hard Drive for CoolCopyD7
When the system has a hard drive connected, the hard drive must connect on IDE 0 port with
“Master” setting and the DVD-ROM must set at “Slave.”
Hardware Connection without Hard Drive for CoolCopyD7
Coolcopy 7
Coolcopy 7
IDE 4 DVD+RW
IDE 3 DVD+RW
IDE 2 DVD+RW
IDE 1 DVD-
IDE 8 DVD+RW
IDE 7 DVD+RW
IDE 6 DVD+RW
IDE 5 DVD+RW
IDE 5 DVD+RW
IDE 1 DVD-
IDE 8 DVD+RW
IDE 2 DVD+RW
IDE 7 DVD+RW
IDE 6 DVD+RW
IDE 3 DVD+RW
IDE 4 DVD+/-
Pow er
Pow er