Unix/linux, Step3: unpack the printer, Setting up a multifunction printer – IBM Partner Pavilion 1464 User Manual

Page 9: Unpacking, 1 select a location for your printer, Step 3: unpack the printer, Setting up a multifunction printer unpacking

Advertising
background image

9

Unpack the printer

UNIX/Linux

Local printing is supported on many UNIX and Linux platforms, such as Sun Solaris and
Red Hat.

Note:

If your drivers CD does not

contain any UNIX/Linux printer driver
packages, contact the place you
purchased your printer to see if your
printer is supported.

Some printer driver packages are available on the drivers CD. The User’s Guide in each
package gives detailed instructions for installing and using printers in UNIX and Linux
environments.

All the printer driver packages support local printing using a parallel connection. The
driver package for Sun Solaris supports USB connections to Sun Ray appliances and
Sun workstations.

After you have installed the drivers on your computer, you are ready to set up the printer.
Go to “Unpack the printer” on page 9.

Step 3: Unpack the printer

Setting up a
multifunction printer

If you purchased a multifunction printer (MFP) that copies, faxes, and scans, refer to the
documentation that came with the device to see if furniture or other hardware needs to
be set up first.

Unpacking

CAUTION:

The printer weighs 47.7 kg

(105 lb) and requires at least two people
to lift it safely.

1

Select a location for your printer:

Leave enough room to open the printer trays, covers, and doors; access
options; and allow for proper ventilation.

Provide the proper environment:

A firm, level surface

Away from the direct airflow of air conditioners, heaters, or ventilators

Free of temperature, sunlight, or humidity extremes or fluctuations

Clean, dry, and free of dust

38 cm
(15 in.)

30 cm
(12 in.)

61 cm
(24 in.)

51 cm
(20 in.)

160 cm
(63 in.)

Advertising
This manual is related to the following products: