Iomega 100D - Manual (Page 4)

4

Quick Install



For best performance and easiest configuration, Iomega recommends connecting the Iomega NAS 100d to
a wired network. For instructions on configuring the Iomega NAS via a wireless connection, see the user's
manual on the Solutions CD.
Connect the included Ethernet cable to the Iomega
NAS and to an open network port on your router,
switch, or hub.
Connect the power supply to the Iomega NAS and
then to a power strip or outlet.
Press the power button on the back panel of the
Iomega NAS.
NOTE: The Iomega NAS will take a couple of
minutes to start up. Please wait until the Power
LED changes to solid blue before proceeding.
If your network does not have a DHCP
server, change your computer’s IP address
to 169.254.10.85 with a subnet mask of
255.255.0.0. The default IP address of the Iomega
NAS is 169.254.10.10. For more information on
changing your computer’s IP address, see page 7.
If you have a problem, we can help. Please do NOT return this product to the store!
Your answer is on the web. Visit our award-winning web support site www.iomega.com.
Select your region, then select Support.