Insignia NS-P3114 - Manual (Page 16)

14
NS-P3114 Portable CD Player
www.Insignia-Products.com
4 Insert a memory card into the memory card slot. Your player reads the
card, then automatically starts playback.
5 If you want to pause playback, press the PLAY/PAUSE/POWER button.
Press the button again to resume normal playback.
6 Press the STOP/POWER OFF button to stop playback.
LCD information
• MP3 files must have the .MP3 file extension. WMA files must have the
.WMA file extension. If the card does not have MP3 or WMA files, CARD
IS INVALID appears on the LCD.
• If your player is in Memory Card mode and no memory card is in the
memory card slot, NO CARD appears on the LCD.
• If your player’s controls are locked (the HOLD switch is in the ON
position) and a memory card is in the memory card slot, CARD IS
PROTECTED appears on the LCD.
Scanning for audio CD tracks
To scan for a track on an audio CD:
• To go to the next track on a CD, press the SKIP+/TUNING+ button.
• To scan forward on CD, press and hold the SKIP+/TUNING+ button until
you find the track you want, then release the button.
• To go to the previous track on a CD, press the SKIP–/TUNING– button.
NS-P3114.fm Page 14 Thursday, February 16, 2006 12:44 PM