Intel Fujitsu P8010 - Manual (Page 62)

61 - Power Management
Restarting the System
If your system is on and you need to restart it, be sure that you use the following procedure.
Windows Vista:
1 Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand
pane.
2 Select Restart from the list.
Windows XP:
1 Click the [Start] button, and then click Turn Off Computer.
2 Select the Restart option. Your notebook will shut down and then reboot.
Powering Off
Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn
off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts
down without error, use the Windows shut down procedure.
Using the correct procedure to shut down from Windows allows your notebook to complete its
operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
T URNING OFF YOUR L IFE B OOK NOTEBOOK WITHOUT EXITING W INDOWS OR TURNING ON YOUR
NOTEBOOK WITHIN 10 SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN
YOU START THE NEXT TIME .
B E SURE TO CLOSE ALL FILES , EXIT ALL APPLICATIONS , AND SHUT DOWN YOUR OPERATING SYSTEM
PRIOR TO TURNING OFF THE POWER . I F FILES ARE OPEN WHEN YOU TURN THE POWER OFF , YOU WILL
LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED , AND MAY CAUSE DISK ERRORS .