IDEAL INDUSTRIES Tone Generator and Amplifier Probe 62-140 - Manual (Page 2)

Battery Replacement
1) Remove the screw at the back of the Tone Generator or the Amplified Probe with a #1 Phillips-
head screwdriver and remove battery door.
2) Remove old cell batteries, rapping case against the palm of the hand will dislodge batteries.
3) Install 4 new LR44 cells being careful to orient plus end of battery with plus symbol on case.
4) Replace battery door and reinsert the screw. Do not over tighten.
Product specification
Power Requirements:
4 x LR44 button cells (6 volts)
Battery life: Generator: 100hrs, Amplified probe: 12hrs
Externally applied
voltage w/o damage:
250 volts peak DC or 175 volts RMS AC
Tone frequencies (+/-5%): 995Hz and 845Hz alternating tones
Tone voltage: 12 volts p-p no load, new battery
Tone power: 8dbm into 600 ohms, new battery
Warranty
IDEAL guarantees to the end-user purchaser that its products will be free of all defects in material
and/or workmanship. This warranty extends for a period of 12 months for the test instrument and 3
months for the cables from the date of manufacture or proof-of-purchase. The obligation of IDEAL
under this warranty is limited to the repair or replacement (at our option) during the warranty period of
any part that proves to be defective in material or workmanship under normal use, installation and
service, provided the product is returned to IDEAL freight prepaid. Products returned to us must be
accompanied by a copy of the purchase receipt. In the absence of such a receipt, the warranty period
will cease 12 months from the date of manufacture. This warranty does not extend to products that
have been subjected to neglect, accidental or improper use, or to units which have been altered,
repaired, or inspected by anyone other than IDEAL authorized personnel. In no event will IDEAL be
liable for any incidental or consequential damages
Shipping
1. Before returning any product to IDEAL, you must first request a Returned Materials Authorization
(RMA) number by contacting our Customer Service Dept. at 800-435-0705.
No shipments will be accepted without this number, which must be clearly marked on the
shipping label.
2. Ship the equipment with a copy of the sales receipt, if available.
3. Attach a description of the operational problem.
4. Include a contact name, address, phone number, and e-mail address (if possible).
5. Pack securely to prevent damage during shipping.
6. Ship prepaid to: IDEAL INDUSTRIES, INC.; Becker Place; Sycamore, IL 60178
Product Registration
Please visit www.idealindustries.com
IDEAL INDUSTRIES, INC.
Sycamore, IL 60178, U.S.A.
800-435-0705 Customer Assistance
www.idealindustries.com
ND 4894-1
ND 4894-1 62-140 TraceTone Ins. 4/6/04 7:35 AM Page 2