Integra E5SF1UD - Manual (Page 48)

48 EN
FUNCTION SETUP
Menu Setting items Options Descriptions
Delay Time
This is a parameter for
optimizing the timing at
which the sound is
output from the
speakers according to
their distance from the
listening position. Distance Feet* Set the desired measure system. This
measure system will be used for
“Delay Time” setting. Press [Enter] (or
[
s /B]) to switch the settings.
Meters
Front 0ft to 60ft (12ft*)
(0m to 18m (3.6m*)) Select the distance from the listening
position to the speaker to get the ideal
delay time.
Center 0ft to 60ft (12ft*)
(0m to 18m (3.6m*))
Surround 0ft to 60ft (10ft*)
(0m to 18m (3.0m*))
Surround Back 0ft to 60ft (10ft*)
(0m to 18m (3.0m*))
Default Select “Default”, then press [Enter] to
reset “Delay Time” setting to the default.
*) Settings with (*) are the default.
• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically corresponding to
each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and “Surround Back” to “Large”.)
• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround Back” setting
cannot exceed 15 ft (4.5m), and the difference between the value of the “Front” and “Center” setting cannot
exceed 5 ft (1.5m).
• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot exceed the value of
the “Front” setting.
• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed automatically to the
setting value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting of “Center”, “Surround” and
“Surround Back” will be changed to 60ft (18m) as well.)