Icom IC-M504 - Manual (Page 53)

47
6
DSC OPERATION
6
■ DSC Set mode
D D MMSI code check
(See p. 16)
D D Add Individual ID/Group ID
(See pgs. 17, 19)
D D Delete Individual ID/Group ID
(See pgs. 18, 20)
D D Offset time
This item sets the offset time from the UTC (Universal Time
Coordinated) time.
q Push [MENU] to enter the DSC menu.
w Rotate [DIAL] to select “S
Se et t u up p,” and push
[DIAL•ENTER].
e Rotate [DIAL] to select “O Of ff fs se et t T Ti im me e,” push
[DIAL•ENTER].
r Set the offset time from the UTC (Universal Time Coordi-
nated) time by rotating [DIAL].
• Push [16•9] or [CH/WX•DUAL•U/I/C] to move the cursor forward
or backward, respectively.
• Push [CLR] to cancel and return to the set up menu.
t Push [DIAL•ENTER] to program and to return to the set
up menu.
--DSC Menu--
Input Offset Time
+12:00
<CLR <CLR˘Exit Exit / ENT ENT˘OK> OK>
--DSC Menu--
Input Offset Time
00:00
<CLR <CLR˘Exit Exit / ENT ENT˘OK> OK>
No offset time (default)
+12 hours
--DSC Menu--
Select Item
Add:INDV ID
Add:Group ID
DEL:INDV ID
DEL:Group ID
˘ Offset Time
MMSI Check
--DSC Menu--
Select Item
POS Report Reply
Polling Request
Polling Reply
Received Calls
Distress Setting
˘Set up