IBM SCOD-3ZVQ5W - Manual (Page 152)

144 COG
xSeries 346 memory options
Notes:
1.
Quantity two of each SBB PN must be ordered to equal its corresponding option.
2. Supports Chipkill. Mixing Chipkill DIMMs with nonChipkill DIMMs will disable all Chipkill function.
SBB
Number 1
Option
Number
Feature
Code Memory Options
73P2873 - 0503 512MB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
- 39M5821 - 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit
73P2874 - 0504 1GB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
- 39M5809 - 2GB (2x1GB) PC2-3200 ECC DDR2 RDIMM Kit
73P4794 - 0505 2GB PC2-3200 ECC DDR2 RDIMM SDRAM (chip-kill)
- 39M5815 - 4GB PC2-3200 ECC DDR2 SDRAM RDIMM (2X2GB KIT) Option
90P0870 - 0501 256MB DDR-II SDRAM DIMM (non chip-kill)
- 73P3523 - 512MB (2x256MB) PC2-3200 ECC DDR2 RDIMM Kit
90P1218 - 0502 512MB DDR-II SDRAM DIMM (non chip-kill)
- 39M5818 - 1GB (2x512MB) PC2-3200 ECC DDR2 RDIMM Kit
39M5807 - 0552 1GB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
39M5813 - 0593 2GB PC2-3200 ECC DDR2 RDIMM SDRAM (chip-kill) Single rank
39M5816 - 0541 512MB DDR-II SDRAM DIMM (non chip-kill)
39M5819 - 0554 512MB PC2-3200 CL3 ECC DDR2 SDRAM RDIMM
Note: 16GB of memory is available via eight DIMM slots. Due to two-way interleaving, installation of memory
DIMMs in matched pairs is required beginning with DIMM slots one and two, then three and four, then five
and six, then DIMM slots seven and eight. Memory-mirroring requires all installed DIMMs to match and
effectively reduces available memory by half. Hot-spare memory requires all installed DIMMs to match except
for the last pair which must be of equal size or greater than other installed pairs.
Table 25. Standard Memory Configuration
Model Std. DIMM Configuration
05Y, 15Y 512MB DDR-II SDRAM DIMM (non chip-kill)
25Y, 31Y, 32Y, 35Y, 41Y, 45Y 512MB DDR-II SDRAM DIMM (non chip-kill)
E1Y, E2Y 1GB PC3200 ECC DDR2 SDRAM RDIMM