Connecting to an audio player using the aux input – iLive IS608B User Manual
Page 9
9
Connecting to an Audio Player using the Aux Input
When connecting two products using an RCA Cable, match the colored ports with
the same colored connection. (Red to Red, White to White, and Yellow to Yellow)
1. Plug one end of a .5 mm Cable (not included) or a .5 mm - RCA Cable (not
included) into the AUX (Auxiliary) Input on the unit.
. Plug the other end of the .5 mm Cable into the audio output/headphone output on
an Mp Player or Other Audio Source.
. Press the Power/AL Off Button to turn the unit on.
4. Press the Source Button to switch the unit to Aux mode.
5. Audio played from the Mp Player or Other Audio Source will now be heard on
the unit.
If connecting to the headphone output of an audio source, the source’s volume
controls may need to be adjusted for optimal sound.
IS608B-IB.indd 9
4/7/008 10:41: AM