ICP DAS USA MSM-508FCS - Manual (Page 10)

Industrial Ethernet Layer 2 Managed Switch – Web Management Manual
April 29, 2008 7
COM1 port is the RS232 standard, use for Console Connection. Factory default setting is:
Baud Rate : 115200
Data Bit : 8
Parity Check : 0 (None)
Stop Bit : 1
COM2 is the RS485 standard, use for Modbus communication. Factory default setting is:
Baud Rate : 115200
Data Bit : 8
Parity Check : 0 (None)
Stop Bit : 1
Digital Input / Output
ICPDAS Managed Switch supports 3 points of digital input / output interface.
User can monitor DI/O status from web management.