Ives 112HD Series - Manual (Page 2)

Page 2 of 2 829168-00(1)
Mount hinge to door. 2
Mount door to frame 3
Check for proper operation
and clearances. 4
Place door leaf of hinge
against hinge edge of
door so that top of hinge
is flush with top of door.
Hinge aligment lip must
lay flat against full length
of door.
With hinge held firmly in place, mark all hole locations on
frame using center punch.
Drill all holes as in step 1.
Attach hinge leaf to door using fasteners provided and #3
phillips drive. See screw chart below.
Note: Fasten top screw first, and bottom most screw
second, making sure hinge is aligned correctly.
A.
B.
C.
D.
With door held securely,
position door 90 degrees to
opening and align mounting
holes in frame leaf of hinge
with marks on frame made
in step 1. Note: An angle
block, jack or shims will be
helpful in positioning the
door properly.
With hinge and door held
securely and accurately in
place, install #12-24 flat
head screw through top hole
in frame leaf of hinge and
into frame. Align other
holes and install all
other remaining screws.
A.
B.
Close door and check for
proper operation.
Check push side of door for
proper clearances. Clearance
for single door is shown to the
right and double door is
shown below.
Check with NFPA 80 manual
for clearance requirements
on FIRE-RATED openings.
A.
B.
C.
1/8”
Door
Frame
Mark frame hole locations. 1
Open hinge and place frame
leaf flat against surface of
frame leaving 1/8” gap
between top of hinge
and frame header.
Hinge lip should be
held tight against the
frame face from top
to bottom.
Mark all hole locations
on frame using center punch provided.
Drill all holes using #13 (.185”)
or 3/16” (.188”) drill for metal frame.
For wood frame use 5/32” (.156”) drill. Optional
wood screw pack required.
DO NOT install hinge to frame at this time.
A.
B.
C.
D.
1/8”
5/16”
1/8”
5/16”
1/8”
5/16”
3/16”
INSTALLATION
Flush
Door
Top view
Door
1/8”
Screw Chart
#12-24 flat head screws
#12-24 flat head screws (frame)
#12 x 1-1/2” flat head wood screws (door)
#12 x 1-1/2” flat head wood screws
Metal frame &
metal door
Metal frame &
wood door*
Wood frame* &
wood door*
Door & Frame
Material
Screw Type
*Optional wood screw pack required.