Intellinet Network Solutions 550000 - Manual (Page 39)

Network Video Server User’s Guide
39
Event Trigger Configuration
NETWORK VIDEO SERVER
can perform certain tasks
without user interaction. It can
send images via Email or
upload JPG images to an FTP
Server, i.e. an Internet Web
Server or a shared network
drive. It can trigger external
devices by supplying power to
the 12V output port. And it
can access shared network
drives for storage of JPG
images.
There are three trigger events:
1. Activated by external
security sensors. You may
connect external devices such
as Infrared Sensor or Alarm
Sensor to use with the
provided terminal block
(please refer to Appendix F –
The I/O Connector).
2. Activated by the internal
motion detection
3. Periodically every xxx
seconds.
Please note:
Only one trigger condition
should be selected at a time.