Iluv IMM190 - Manual (Page 4)

1. Speakers
2. iPhone / iPod support release switch
3. iPhone / iPod support (for horizontal display)
4. iPhone / iPod support pad
5. iPhone / iPod dock (30pin connector)
6. button
7. VOL + / VOL -
8. SNOOZE button
9. Battery compartment
10. AUX IN jack
11. Power adapter jack
AUX IN
DC IN 9V
iMM190
iLuv Creative Technology Made in China DESIGNED IN NEW YORK USA
Power Source : DC 9V, 1.5A, 6 x “AA”Size Batteries
Power Consumption : 15W
Stereo Speaker for iPhone/iPod
PUSH OPEN
VOL
SNOOZE
AUX IN
DC IN 9V
iMM190
iLuv Creative Technology Made in China DESIGNED IN NEW YORK USA
Power Source : DC 9V, 1.5A, 6 x “AA”Size Batteries Power Consumption : 15W
Stereo Speaker for iPhone/iPod
PUSH OPEN
VOL
SNOOZE
AUX IN
DC IN 9V
iMM190
iLuv Creative Technology Made in China DESIGNED IN NEW YORK USA
Power Source : DC 9V, 1.5A, 6 x “AA”Size Batteries Power Consumption : 15W
Stereo Speaker for iPhone/iPod
PUSH OPEN
VOL
SNOOZE
Location of Controls on the Main Unit
GETTING STARTED
1
2
iLuv | 6 iMM190 | V10M10_IM_EN_01212010 5 | iLuv
3
5
4
6
7
8
9
10
11
In addition to AC power, this unit can operate on 6 X “AA” batteries (not included).
1. Open the Battery Compartment.
2. Insert 6 “AA” size batteries into the
Battery Compartment, making sure that the
batteries are installed with the proper polarity (+/-)
are maintained.
GETTING STARTED
Installing the Batteries
Notes on battery use
· To save battery power, please always use AC adaptor for speaker power supply.
· Load new batteries with their polarities (+/-) aligned correctly.
· Do not apply heat to batteries, or internal short circuit may occur.
· If this unit is not to be used for a long period of time, remove all batteries and
store them in a cool and dry place.
· Remove spent batteries immediately and dispose of them.
· Do not use old and new batteries together. Also never use an alkaline battery
with a magnesium battery.
AA
1
2 AA
AA
AA
AA
AA