Ingenico 8550 - Manual (Page 16)

Ingenico 8550
14
3.3 Terminal connections
3.3.1 Via the charger unit
0 The power supply socket must comply with applicable standards. Ask your
installer for advice.
Connecting to the power grid
0 The charger unit supplied is specially designed for the terminal. Do not use any
other unit.
) Connect the terminal to the charger.
) Connect the power supply unit to the charger unit as shown above and then connect the
power supply unit to the power grid.
Disconnecting from the power grid
) Disconnect the power supply unit from the power grid.
) Disconnect the terminal from the charger unit.
i8550
Charger unit
Power supply unit