IBM L191p - Manual (Page 24)

22
Image Setup Automatic
Activates automatic image adjustment.
Controls Locked
Manual
• Clock
• Phase
Use the or button to adjust away the interference.
If satisfactory results are not obtained using the Phase
adjustment, use the Clock adjustment and then use Phase
again.
Image
Properties
Color
Adjusts intensity of red, green and blue.
Same as Analog
1. Mode 1
(Preset Mode)
•
6500K
• 7200K
• 9300K
6500K adjusts the screen more red.
7200K adjusts the screen to the default color settings.
9300K adjusts the screen more blue.
2. Mode 2
(Custom)
•
Red
• Green
• Blue
Increases or decreases 'red'.
Increases or decreases 'green'.
Increases or decreases 'blue'.
Sharpness
1. Mode 1
adjusts the image softer.
2. Default
returns the image sharpness to the default settings.
3. Mode 2
adjust the image sharper.
Input video signal
This monitor can accept video
signals through two different
connectors.
Most desktop computers use a
D-SUB connector. Select
digital among OSD Controls
when you use DVI connector.
1 - selects D-SUB
(Analog)
2 -selects DVI-Digital
Same as Analog
OSD Icon on
Main Menu
Submenu Description
Controls and
Adjustments (Analog)
Controls and
Adjustments (Digital)
Same as Analog