iHome iH13 - Manual (Page 6)

4
Using iH13
the speakers and listen to your iPod privately.
Using the Line-in and Headphone Jacks
a) Use an audio patch cord ( available at www.ihomeaudio.com) to play nondocking iPod models or other audio devices
through the iH13  Line-in Jack (one end in the device’s line out or headphones jack, the other in the iH13 line in jack).
Make sure there is no iPod connected to the iH13 when using the  line-in jack. Press the  PLAY button to mute or
unmute line-in source.
b) Use the  Headphone Jack on the iH13 to disable the speakers and listen to your iPod privately.
Hold Switch
The iH13 has a  Hold Switch to disable button functions while on the go to prevent accidental playing of the iPod and
loss of battery power. Move  Hold Switch to ON position to lock up button functions. Move the  Hold Switch to OFF
for normal button function.