Setting up your shelf system, Installing remote control batteries, Using the remote control – Insignia NS-ES6113 User Manual

Page 12

Advertising
background image

12

Insignia NS-ES6113 CD Shelf System with iPod® Dock

www.insigniaproducts.com

Using the remote control

Aim the remote control at the IR sensor lens on the front of
your shelf system from a distance of up to approximately 23
feet (7m) away.

Make sure that there are no obstacles between the remote
control sensor on your shelf system and the remote control.

Direct sunlight, an incandescent or fluorescent lamp, or any
strong light shining on the remote sensor may prevent the
sensor from receiving signals from the remote control.

Setting up your shelf system

Installing remote control batteries

To install the remote control batteries:
1
Turn the remote control over to the back side.

2 Push the release tab to the right and pull the battery tray out of the

remote control.

3 If this is the first time you will be using the remote control, remove

the insulation sheet that covers the battery.
-OR-

12

(play/pause)

/

MEMORY button

In CD, iPod

®

, or USB modes, press to begin

playback. Press again to pause playback. Press
and hold to turn off your iPod

®

.

In tuner mode, press and hold to save a station
preset.

13

VOLUME –/+
buttons

Press to decrease (-) or increase (+) the
volume.

14

DISPLAY

To display the current time. Press again to
resume the original mode display.

15

(backlight)

Press to adjust the display backlight to glow
brighter or dimmer in power-on mode.

16

STOP

In CD or USB mode, press to stop playback.
In iPod

®

mode, press to pause playback.

#

Button

Description

NS-ES6113_09-0084 ENG.fm Page 12 Wednesday, March 11, 2009 10:29 AM

Advertising