Setting the bios configuration jumper, Bios configuration jumper block – Intel D425KT User Manual
Page 35
Advertising
Installing and Replacing Desktop Board Components
35
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from the computer before
changing a jumper. Moving the jumper with the power on may result in unreliable
computer operation.
Figure 12 shows the location of the Desktop Board’s BIOS configuration jumper block.
Figure 12. BIOS Configuration Jumper Block
The three-pin BIOS configuration jumper block enables board operating modes.
Table 10 shows the jumper settings for each of the available modes.
Advertising