Insignia NS-DVD1 - Manual (Page 18)

18
Insignia NS-DVD1 DVD Player
www.insignia-products.com
Playing a disc
To play a disc:
1 Press the OPEN/CLOSE button to open the disc tray.
2 Insert a disc, label side up, into the disc tray, then press the
OPEN/CLOSE button to close the disc tray.
If you inserted a DVD, your DVD player displays the DVD menu or
title menu.
If you inserted a CD, your DVD player starts playing the CD.
Controlling disc playback
To control disc playback:
• If the CD is not playing or the DVD menu or title menu is
displayed, press the PLAY button to start disc playback.
• Press the PAUSE button to pause playback. Press the
PLAY button to resume playback.
• Press the NEXT or PREV button to go to the next or
previous DVD chapter or CD track.
• Press the FWD or REV to fast-forward or fast-reverse on
the disc. Each time you press one of these buttons, the
speed changes from 1× to 2× to 4× to 8× to 16× to 32× then
back to 1×. (Compatible with DVDs, VCDs, CDs)
• Press the SLOW button one or more time during DVD
playback to play the DVD in slow-motion. You can select
1/2Ч, 1/4Ч, 1/8Ч, or 1/16× the normal speed. (Compatible
with DVDs and VCDs)
• Press the STOP button once to stop disc playback. If you
press the PLAY button after you press the STOP button
once, the disc starts playback at the point you stopped.
• Press the STOP button twice to completely stop disc
playback. If you press the PLAY button after you press the
STOP button twice, the disc starts playing at the beginning.
Adjusting the volume
To adjust the volume:
• Press the VOL+ button to increase the volume.
• Press the VOL– button to decrease the volume.
• Press the MUTE button to mute the sound. Press this button
again to restore the sound.
NS-DVD1.fm Page 18 Friday, July 28, 2006 3:43 PM