IBM MICROPORTABLE ILM300 User Manual
Page 38
3.
Working on a flat, clean surface turn the projector over, with the bottom facing you. With a
screwdriver, unscrew the lamp housing them gently open the lip to the lamp housing.
4.
Carefully remove the lamp housing and dispose of it in an environmentally proper manner.
Attention:
This product contains a metal arc lamp which contains mercury, a caustic substance. Dispose of
it as required by local ordinances and regulations.
Attention:
Be extremely careful when removing the lamp module. In the unlikely event that the bulb
breaks, small glass fragments might be generated. The lamp module is designed to contain these
fragments, but use caution when removing the lamp module.
Attention:
Do not drop the lamp module or touch the glass bulb. The glass may shatter and cause injury.
Oils from your hands might shorten the life of the bulb.
5.
Insert the new lamp housing. Gently press the lamp housing back into position.
6.
Tighten the screws. Return the projector to the upright position.
7.
Attach the power cord to the back of the projector and an electrical outlet. Press the power button on
top of the projector to turn it on.
8.
To reset the lamp timer counter, see
″Reset Lamp timer″ on page 21 for details.
28
IBM iLM300 MicroPortable Projector: User’s Guide