Insignia NS-26L450A11 - Manual

26"/32" 1080p LCD HDTV
QUICK SETUP GUIDE
NS-26L450A11/NS-32L450A11
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Universal remote control TV codes (for all Insignia TVs manufactured after Jan. 1, 2007)
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
TV stand and 3 screws
Quick Setup Guide
Remote
control sensor
Power
indicator
Remote control
and 2 AA
batteries
Remote
control holder
Component
cable
Audio
cable
AC
power
cord
Cleaning
cloth
Front features
Installing the stand
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Align the stand on the TV base, then insert the metal tabs on the stand
into the designated slots on the TV base
3 Secure the stand to the screen with three screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the three screws holding the TV to its stand.
3 Remove the stand column, then install the TV base cover to keep dirt and
dust from entering your TV.
4 Secure the wall-mount bracket to the back of your TV using the screws
provided with the bracket.
Setting up your remote control
1 While pressing the release latch on the battery compartment cover on the
back of the remote, lift the cover off the remote.
2 Insert two AA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries align with the + and – symbols in the
battery compartment.
3 Replace the cover.
Programming your existing universal remote control
To program your existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
See your manual to program your universal insignia remote to control other
devices.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game station
Using HDMI (best)
Using component (better)
Using composite (good)
Connecting an antenna
Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the
back of your TV and the RF OUT jack on the antenna.