iLive 0915-0820-09 - Manual (Page 5)

8 9
█ USING THE AUXILIARY INPUT
1. Connect an MP3 Player or other audio
source to the Auxiliary Input.
2. Press the Power Button to turn the unit
on.
3. Press the Source Button to switch the
unit to Aux Mode.
Use the connected device’s controls to
control the audio playing through the unit.
█ TUNING THE AM/FM RADIO
1. Press the Power Button to turn the unit
on.
2. Press the Source Button to switch the
unit to Tuner Mode. "Tuner" will appear
on the LCD Display, indicating that the
unit is in Tuner Mode.
3. Press the Source Button to switch to AM
or FM radio mode.
4. Press the Skip/Tune Buttons to tune the
AM or FM radio stations.
5. Press and hold the Skip/Tune Buttons for
3 seconds to search for a receptive AM or
FM radio station.
6. Press the St./Mono Button to turn the
FM Stereo Mode off and on .
7. Adjust the FM Wire Antenna to improve
FM radio reception. An AM antenna is
built into the unit. Adjust the position of
the unit to improve AM radio reception.
OPERATIONS
█ SAVING AN AM/FM RADIO
STATION TO THE UNIT'S MEMORY
1. Tune the AM/FM Radio to the desired
station.
2. Press the Mem/Clk Adj Button.
3. Press the Stop/Mem+ Button to select
a memory channel for the current radio
station.
4. Press the Mem/Clk Adj Button.
5. To cycle through saved radio stations,
Press the Stop/Mem+ Button.
█ SETTING THE CLOCK
1. Press the Power Button to turn the unit
off.
2. The Power Indicator Light will
illuminate red, indicating that the unit is
in Standby Mode.
3. Press the Mem/Clk Adj Button.
4. The Hour will begin to blink.
5. Press the Skip/Tune Buttons to adjust
the hour.
6. Press the Mem/Clk Adj Button to set the
hour.
7. The Minute will begin to blink.
8. Press the Skip/Tune Buttons to adjust
the minute.
9. Press the Mem/Clk Adj Button to set the
minute, and finish setting the clock.
█ SETTING THE TIMER
1. To set the timer, you must first go through
the steps of Setting the Clock.
2. After the clock is set, "Timer" will appear
on the LCD Display and the timer hour
will begin to blink, indicating that you are
now editing the timer.
3. Press the Skip/Tune Buttons to adjust
the hour.
4. Press the Mem/Clk Adj Button to set the
hour.
5. The Minute will begin to blink.
6. Press the Skip/Tune Buttons to adjust
the minute.
7. Press the Mem/Clk Adj Button to set the
minute, and finish setting the timer.
8. After setting the timer, press and hold
the Mem/Clk Adj Button to activate
the timer. The word "Timer" will appear
on the LCD display once the timer is
activated.
OPERATIONS