Safety precautions – Cornelius ENDURO-150 User Manual

Page 3

Advertising
background image

1

620904401

SAFETY PRECAUTIONS

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates
contamination of ice. To ensure continued protection and sanitation, observe the following:

ALWAYS: disconnect power to the dispenser before servicing or cleaning.

NEVER: place hands inside of hopper or gate area without disconnecting power to the dispenser.
Agitator rotation occurs automatically when dispenser is energized!

ALWAYS: be sure the removable lid is properly installed to prevent unauthorized access to the hopper interior
and possible contamination of the ice.

ALWAYS: be sure the upper and lower front panels are securely fastened.

ALWAYS: keep area around the dispenser clean of ice cubes.

CAUTION:

Dispenser cannot be used with crushed or flaked ice.

Use of bagged ice, which has frozen into large chunks, can void warranty.
The dispenser agitator is not designed to be an ice crusher. Use of large

chunks of ice which “jam up” inside the hopper will cause failure of the agitator
motor and damage to the hopper. If bagged ice is used, it must be carefully and
completely broken into small, cube-sized pieces before filling into the dispenser
hopper.

DESCRIPTION

The “ENDURO” series of ice dispensers solves your ice and beverage service needs in a sanitary, space saving,
economical way. Designed to be manually filled with ice from any remote ice-making source, these dispensers
will dispense cubes (up to 1-1/4 inch in size), cubelets and hard-chipped or cracked ice; and, in addition, several
flavors of post-mix beverages. “BC” units include beverage faucets and a cold plate and are designed to be sup-
plied direct from syrup tanks and carbonator, with no additional cooling required.

IMPORTANT: For dispensing compressed or extruded style ice, an Ice Diverter Kit must be installed on the
dispenser (see Figure 1).

SPECIFICATIONS

Model Descriptions:

ED150 – B (Beverage Faucets)
C (Cold Plate)
Z (No Drip Tray)

Ice Storage:

150 lbs

Maximum Number of Faucets Available:

8

Built-in Cold Plate:

Yes, on BC models only

Electrical:

120/1/60, 3.0 Amps total unit draw
220–240/1/50/60, 2.0 Amps total unit draw

Dimensions:

Std unit = 24–1/2 in. Wide X 30–11/16in. Deep X 35–5/8 in.
High
Z–Model = 24–1/2in. Wide X 23–1/16 in. Deep X 35–5/8 in.
High

Advertising