Insignia NS-BRHTIB - Manual (Page 11)

7
Blu-ray Disc Home Theater System
www.insigniaproducts.com
Connecting radio antennas
To connect an AM antenna wires:
1 Flip the antenna wire covers down on the
–AM ANT+ jacks on the back of your player.
2 Insert the negative wire into the – jack.
3 Insert the positive wire into the + jack.
To connect antennas:
1 Connect the AM antenna wires by following the
preceding instructions, then turn on your player,
tune to a radio station, and adjust the angle of
the antenna if necessary.
2 Connect the FM antenna to the FM antenna jack
on the back of your player, then turn on your
player, tune to a raido station, then attach the
antenna to a wall or pillar in a direction that
provides the best reception.
Using your player
Playable discs
Playing a Blu-ray Disc or DVD
To play a Blu-ray Disc or DVD:
1 Press STANDBY/ON.
2 Turn on the TV, then select the input setting on
the TV that matches the connection method
you used to connect your player.
3 Press OPEN/CLOSE to open the disc tray.
4 Place a disc on the disc tray with the label facing
up, then press OPEN/CLOSE to close the disc
tray. It may take a few seconds for the disc to
load.
5 If a Blu-ray Disc or DVD menu opens, press
or to select PLAY, then press ENTER.
6 To eject the disc, press OPEN/CLOSE.
Controlling Blu-ray Disc or DVD playback
To control Blu-ray Disc or DVD playback:
• To start or pause playback, press
(play/pause).
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
• To stop playback, press (stop). The Setup menu
is displayed. To resume playback, press
or to select DVD/BD-ROM, then press ENTER.
Depending on the disc, playback starts where it
stopped or at the beginning of the disc. If you
press (stop) twice, playback stops completely.
To start playback again, press
(play/pause).
Playback starts at the beginning of the disc.
• To fast-forward, press . Each time you press this
button, the fast-forward speed changes in the
following sequence: Fast x 2, Fast x 4, Fast x 8,
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press
(play/pause) to resume normal playback.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Disc type Logo Disc type Logo
Blu-ray Disc DVD-R
DVD-video
(DVD-ROM) Audio CDs (CDDA)
DVD-RAM MP3/WMA/
JPEG/Data CD
DVD-RW
1
2 3
FM ANT
- AM ANT +
AM antenna
FM antenna
Notes
• Writeable DVD discs (DVD-RAM, DVD-RW,
DVD-R) must be finalized, VR-mode only.
• Your player supports discs that are compatible
with DVD-RAM Standard Version 2.0.
• Playback may not work for some types of discs,
or when specific operations, such as angle
change and aspect ratio adjustment, are being
performed. Information about the discs is
written in detail on the box.
• Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for playback.
• CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF
or ISO9660 format can be played back.
• Windows Media Audio (WMA) files must be
written to the disc with a .wma file extension in
order to be recognized and played back
correctly.
• JPEG picture files must be written to the disc
with a .jpeg or .jpg file extension in order to be
recognized and played back correctly.
Note
If appears on the screen, the current action is not
permitted by the disc or your player. For example,
many discs do not let you fast-forward through the
warning information at the beginning of the disc.