Intellinet Network Solutions KVM 157025 - Manual (Page 3)

3
NOTE: The KVM Switcher software supports only the Windows operating system on PC platforms.
For other OS platforms, such as Linux, you can still use the keyboard hotkey — ScrLk + ScrLk — to
switch PCs. However, this switching hotkey is not available on non-PC platforms such as MacOS.
When connected to a Mac, use the face-panel button to switch ports.
2. Connect the shared USB keyboard, mouse,
monitor, speaker/headphone and microphone
each to its port on your KVM Switch.
3. Connect each KVM PC port to a computer using
the slim 3-in-1 KVM combo cable and the audio/
mic cable. Once you have
connected the switch and
computers properly, you can
operate the KVM Switch.
NOTE: Some older computers with
a USB interface may need to
manually enable the USB option in
the BIOS settings before using any
USB devices. If your USB interface does not
work, check the USB option status in the BIOS.