Insignia NS-A2111 - Manual (Page 15)

15
Welcome
www.insignia-products.com
2 Press the STANDBY, FM/AM, ENTER, AUDIO IN, or EJECT
buttons on the remote control or the STOP, FM/AM, or EJECT
buttons on the front panel to exit Standby mode. The player enters
the mode corresponding to the button you pressed.
3 After exiting Standby mode, press EJECT on the remote control or
front panel to open the disc tray, insert a disc, then press EJECT
again. The system starts to play.
Using basic features
Using navigation buttons
• Press Enter to enable selected items.
• While in Play mode, press STOP to stop playback. The TV
screen displays the Welcome screen. Press Enter to begin
playing from the stopped time. During Play mode, if you press
STOP twice and then press ENTER, the disc is played from the
beginning.
• While in Play mode, press PLAY/PAUSE to pause playback.
Press the button again or press ENTER once to resume
playback.
• While in VCD mode, press MENU on the remote control to
open or close the PBC status. While in DVD mode, press the
MENU button on the remote control to go into the Root Menu
status.
• While playing songs, press the number buttons to directly
select the songs you want to play.
• While in Play mode, press TU+ or TU- to fast forward or fast
review. The available speeds are: FORWARD X2, FORWARD
X4, FORWARD X8, FORWARD X16, PLAY BACKWARD X2,
BACKWARD X4, BACKWARD X8, BACKWARD X16, and
PLAY (normal).
• While in Play mode, press CH- to skip to the previous chapter
or song, or press CH+ to skip to the next chapter or song.
Note
Standby mode is a power-saving mode. However, when you
are not going to use the system for a long time, turn off the
main power.
Note
Some burned discs do not have a Menu feature.
Note
When in FM/AM mode, these buttons switch to the previous
or next channels.
NS-A2111.fm Page 15 Friday, January 26, 2007 6:59 AM