Insignia N/A NS-BRDVD3-CA - Manual (Page 9)

5
Blu-Ray Disc Player
www.insigniaproducts.com
Connecting a TV using a component video
cable (better)
Using a digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
2 Connect a digital optical cable from the
OPTICAL DIGITAL OUT jack on the back of your
player to the OPTICAL DIGITAL IN jack on the
receiver.
Or
Connect a digital coaxial cable from the
COAXIAL DIGITAL OUT jack on the back of your
player to the COAXIAL DIGITAL IN jack on the
receiver.
Using an analog audio receiver
To connect a component-capable TV to an
analog audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
2 Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
Notes
• The following task shows connecting the audio
to a receiver. If you want to use the TV speakers
instead of a receiver, connect the audio cable to
the TV’s audio in jacks on the TV.
• High definition video (up to 1080i) is supported
with a component video cable.
Connect the OPTICAL DIGITAL OUT jack
OR
COAXIAL DIGITAL OUT jack
Component video cable
Back of player
TV
Digital audio receiver
Analog audio receiver
Audio cable
Back of player
Component video cable
TV
NS-BRDVD3-CA_11-0646_MAN_V6_English.book Page 5 Tuesday, June 21, 2011 4:29 PM