iSimple DUALINK PGHVW2 - Manual (Page 5)

5
Once “AUX1” is displayed, press the “►” button on the screen to select it. If you
are currently in “SAT” mode, press the “SEEK ►I” button instead of the “►” button
to select “AUX” mode.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode, turn the rotary knob to
cycle through the available sources. Once “AUX1” or “AUX2” is displayed
on the screen, press the “►” button to select it..
General Motors
PGHGM2/PGHGM3
Operation
Selecting AUX
Press the “BAND” button a few times until XM is displayed on the screen.
Immediately turn the rotary knob to scroll through available sources. Once
“AUX1” is displayed press PRESET 2 to select it.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through the available sources. Once “AUX1” or “AUX 2” is displayed on the
screen press PRESET 2 to select it.
General Motors PGHGM5 Operation
Non Navigation
Selecting AUX
Press the “BAND” button until “XM” is displayed on the screen. Immediately
turn the rotary knob to scroll through available sources. Once “AUX1” is
displayed, press PRESET 2 to select it.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through available sources. Once “AUX1” or “AUX2” is displayed on the
screen press PRESET 2 to select it..
General Motors PGHGM4 Operation
Selecting AUX
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob
clockwise until “AUX1” is displayed. Press the “>>>>>” button to select it. (It may be
necessary to press the “CAT” button in order to make the “>>>>>” button visible.)
Selecting between AUX1 / AUX2
Press the “AM/FM” button and then the “XM” button. Turn the rotary tune knob
clockwise until “AUX2” is displayed. Press the “>>>>>” button to select it. (It may
be necessary to press the “CAT” button in order to make the “>>>>>” button