Setting the time, To set the time, Using your tv – Insignia NS-7HTV User Manual

Page 13: To use your tv

Advertising
background image

11

Insignia NS-7HTV 7” Hand Held TV

www.insignia-products.com

Setting the time

To set the time:
1
Plug in your TV and turn it on by pressing the POWER button.

2 Press the MENU button. The

Setup

Menu

opens.

3 Press the UP/DOWN buttons to highlight Time, then press RIGHT.

The

Time Menu

opens.

4 Press ENTER repeatedly to select your time zone, then press the

LEFT button twice to exit the

Setup Menu

. The time sets itself

automatically.

Using your TV

To use your TV:
1
Gently straighten and pull out the telescoping antenna, then plug

the antenna plug into the RF IN jack.

2 Press the POWER button to turn on the TV.

3 Press the DTV/ATV button to select the mode you want.

4 Press and hold the Auto button for three seconds to begin

searching for available channels and storing them into memory.

Note

If TV reception is poor, you can adjust the length and angle
of the antenna for better reception. If you are in a concrete
building, moving closer to a window may improve reception.
For best reception, connect directly to cable. Reception will
be impacted when using an antenna.

Advertising