Insignia NS-LTDVD32-09 - Manual (Page 30)

30
Insignia NS-LTDVD32-09 32” LCD TV/DVD Combo
www.insignia-products.com
3 Press / to highlight SPEAKER SETUP,
then press ENTER. The Speaker Setup Page
opens.
4 Press / to highlight DOWNMIX, then
press ENTER.
5 Press / to highlight LT/RT or STEREO,
then press ENTER.
• LT/RT-On a disc recorded with a
multichannel soundtrack, the output signal
will be incorporated into the left and right
channel.
• STEREO-On a disc recorded with a
multichannel soundtrack, the output signal
will be incorporated into stereo.
6 Press one or more times to go back to the
previous menu.
7 To close the menu, press to highlight the
Exit icon, then press ENTER.
Setting up DVD Dolby Digital
To set up Dolby Digital:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
2 Press / to select the Audio icon ,
then press ENTER. The Audio Setup Page
opens.
3 Press / to highlight DOLBY DIGITAL
SETUP, then press ENTER. The Dolby
Digital Setup Page opens.
4 Press / to highlight DUAL MONO or
D.R.C, then press ENTER.
5 Press / to highlight STEREO, LEFT
MONO, RIGHT MONO, or MIXED MONO,
then press ENTER.
• DUAL MONO-This is the output mode for
the left and right signals of the selected
audio output. If it is set to MIXED MONO,
the function only works when the DVD
uses 5.1-channel sound.
• D.R.C-Select to adjust the linear
compression rate to obtain different
compression results for the signals.
6 Press / to change the setting, then press
ENTER.
7 Press one or more times to go back to the
previous menu.
8 To close the menu, press to highlight the
Exit icon, then press ENTER.
Using the DVD equalizer
You can select preset graphic equalizer patterns
according to the genre of the music being
played. You can also adjust the equalizer
settings.
To use the equalizer:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.