IOGear GCS632U - Manual (Page 12)

Step. 2
Installation
9
Plug the USB, video, and speaker
connectors of the attached KVM
cables into their respective ports on
the computers you are installing.
Note: The computer attached to the cable with one
dot at its base is the Port 1 computer; the com-
puter attached to the cable with two dots at its base
is the Port 2 computer (see p. 10 for hotkey port
selection).
Repeat the above step for your sec-
ond computer.
Turn on the power to the computers
and refer to Operations Instructions.
Note: The GCS632U’s Power On default is to link
to the first computer you turn on.
3.
4.
5.