iHome iP71 - Manual (Page 4)

Quick Start: Connections
1
3:inserts 1:power
Attach the AC adaptor cable to
the jack on the back of the left
speaker and plug the other end
into a working wall socket.
RESETRESET TESTTEST
4:iPhone/iPod Insert iPhone/iPod into dock
with proper insert
(iPhone/iPod must not be in
a skin or case). iPhone/iPod
will charge while docked.
Press the Power button on
the iP71 then press
play/pause button on your
iPhone/iPod to play the
iPhone/iPod. 5:stand
The iP71 has pull out
“feet” (stands) on the
back of each speaker
for added stability. Grip
the stands and pull
outward for use. Press
back under speaker
body when not
needed.
2:connections
1) Connect the left and right speaker
using the included speaker cable.
The arrows on the plugs should face
upwards.
2) Connect the USB cable to the left
speaker and a powered USB port
on your computer.
3) Connect the computer audio cable
to the audio out jack on your
computer and to the computer jack
(marked “to computer”) on the iP71
to listen to computer audio.
Select the dock insert for your
iPhone or iPod model from the
table below and place insert in
dock.
Never dock an iPhone or
iPod without an insert in place.
NOTE: If you do not have an insert for your iPhone/iPod, please visit
www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one
3rd Gen nano
insert 13
3rd Gen nano
For this
iPhone/iPod
Use this insert
3G iPhone
3G iPhone
Insert 15
iPhone
iPhone
Insert 12
iPod Touch
Insert 14
iPod Touch