iHome IHM60 User Manual

Page 3

Advertising
background image

Using the iHM60

To unlock and expand the speaker, grip the top and bottom

and give a small twist counter-clockwise. DO NOT pull hard

once open, as the built in spring will automatically extend the

speaker to its proper position

Press speaker down from the top and twist clockwise to lock in

place.

Connecting the iHM60

The iHM60 is powered by a rechargeable battery in the

speaker. When the blue power light dims, or if you start to

notice sound distortion at higher volumes, it's time to recharge

the battery.

• Connect the larger USB plug to a powered USB port, such as

that on a computer. The light on the speaker will turn to red

while charging and turn blue when fully charged.

Note: you can continue to listen to the speaker while it is

charging

Charging the iHM60

Extend the Speaker

Charging the iHM60

iHM60 IB English Back

324Wmm x 140Hmm

Print in 1C+1C Black color

July 10,09

mobile phone

PSP

iPod

Laptop

PC

MP3/MP4

USB 2.0

Power Switch

USB Connection

USB Connection

LED

• Connect the mini-USB plug to the audio/charge input jack on

the speaker.

• Connect the stereo 3.5mm audio plug to the headphone jack

or line-out of any audio device.

• Slide the Power Switch of the speaker to the ON position.

The blue power light will come on.

• Press play on your audio device and adjust its volume to

listen to audio.

• If you wish to “daisychain” iHM60 speakers, connect the

3.5mm audio plug to the Line Out Jack on an iHM60 that is

already connected to an audio source (see above) and the

mini-USB plug to the audio input jack on another iHM60.

Note: the larger USB plug is used for charging only, not

for audio. Please refer to next section for charging

instructions.

Connect To Audio Input Source

Line-out

Jack

Advertising