Insignia NS-A1200 - Manual (Page 8)

8
Insignia NS-A1200 Car Amplifier
www.insignia-products.com
Rear view
Item Description
1 Remote bass
boost control
Plug this control into the REMOTE jack on the
amplifier, then mount the control in an easy-to-access
location. Adjust this control to change the bass boost
gain for the amplifier’s speaker output (0 ~ 18 dB).
2 B+ terminal
(battery
positive +)
Because of the amplifier’s power requirements, this
connection should be made directly to the battery’s
positive (+) terminal. For safety, install an in-line fuse
holder (not included) as close to the battery’s
positive (+) terminal as possible. The fuse should
have an ampere rating not exceeding the total value of
the fuses in the amplifier.
3 Remote
power on
Connect your remote antenna or amplifier lead to this
input to automatically turn on your amplifier when the
radio is turned on.
Remote bass boost control: NS-RM
NS-A1200b.fm Page 8 Monday, May 21, 2007 11:37 PM