InStep 11-BA201 User Manual

Page 4

Advertising
background image

CARE AND MAINTENANCE
Check fasteners after one hour of use; check all fasteners to make sure they are

secure. Adjust if necessary. Periodically check the stroller to ensure that it is in

good operating condition.

To adjust the stroller from pulling to the left or right (not rolling straight): Loosen

the front Q/R axle and point the front wheel in the opposite direction the stroller

is pulling, then tighten Q/R lever.
NOTE:

Sometimes it is a very slight adjustment to eliminate the pulling and

this step may need to be repeated.

To adjust front brake caliper:

If front caliper requires additional adjustment to

engage brake pads; first open Q/R brake lever, loosen the cable adjustment nut,

squeeze the brake pads together and while holding brake pads retighten cable

adjustment nut. Then close Q/R lever and check adjustment by squeezing hand

brake lever.
For micro adjustment, turn the front brake caliper’s adjusting sleeve counterclock-

wise. Once the brake pads are adjusted to the desired distance from the rim,

tighten the lock ring. You will need to adjust the cable periodically since it is

normal for the cable to stretch from use.
To clean seat and canopy:

If light cleaning is required, use a soft cloth with warm

water and mild soap then air dry. Do not put in washing machine. Do not put in

dryer. DO NOT BLEACH.
To clean frame: Wipe using a soft cloth with warm water and mild soap. Air dry.

DO NOT USE

polish or abrasives.

WARNING:

If you have any questions concerning the safe use of

this product,please contact Pacific Cycle before using:
1.800.242.6110

8am-5pm CST, Monday-Friday, or MAIL to:
Pacific Cycle Inc.

4730 East Radio Tower Lane

Olney IL 62450
Tel: 1.800.242.6110

or visit us at www.instep.net

E-mail: [email protected]

ONE YEAR LIMITED WARRANTY
Pacific Cycle warrants this product to be free of defective materials and

workmanship for 1 year from the date of original purchase.

THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THIS

PRODUCT, AND IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTY. ANY

IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY

AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN

DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. This limited

warranty gives you specific legal rights and you may also have other rights

which may vary from state to state.

T

his warranty is extended only to the original consumer purchaser for

non-commercial use and does not cover tires or tubes, grips, brake shoes,

or other wear part, ordinary wear and tear, abuse, misuse, neglect, theft, or

damage due to accident.

PACIFIC CYCLE, INC., IS NOT RESPONSIBLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES. THIS LIMITED WARRANTY DOES NOT COVER

ANY PERSONAL INJURIES, DAMAGE TO, OR, FAILURE OF THE PRODUCT OR

ANY OTHER LOSSES DUE TO ACCIDENT, ABUSE, MISUSE, ALTERATION, NEGLECT,

NORMAL WEAR AND TEAR, IMPROPER ASSEMBLY, IMPROPER FIT, IMPROPER

MAINTENANCE OR USE OF UNAUTHORIZED REPLACEMENT PARTS NOT

DESIGNED FOR THE PRODUCT.

To make claim under warranty, notification of such defect must be given to Pacific

Cycle, Inc at the address stated below. You will be instructed on how the product

or part needing replacement should be shipped postpaid to Pacific Cycle, Inc.

Operating Instructions

Run Around

11-BA201, 11-BA202...page 4

M3_double_Platform.indd 5

9/26/05 3:54:19 PM

Advertising
This manual is related to the following products: