IBM I 7.1 - Manual (Page 20)

© 2010 IBM Corporation
IBM Power Systems
20
Work with Disk Configuration
Select one of the following:
1. Display disk configuration
2. Add units to ASPs
3. Work with ASP threshold
- . . .
- . . .
10. Stop hot spare
11. Work with encryption
12. Work with removing units from configuration
Remove Disk Units Without an IPL or Outage
ƒ
Concurrent Remove of Disk Units
– Hot remove disk unit(s) without having to IPL or take
an outage
– Does not require restricted state
– Can be paused and restarted
– So hot, its cool
ƒ Any POWER hardware supporting IBM i 7.1
Manage from:
ƒ (Today) SST (System Service Tools)
ƒ (Future) Systems Director Navigator for i
and System i Navigator
Work with Removing Units From Configuration
Select one of the following:
1. Display disk configuration
2. Display status of remove operation
3. Remove units from configuration
4. Pause the remove operation
5. Resume the remove operation
6. Cancel the remove operation
7. Cancel the remove operation and balance data in the ASP
2
1
Serial Resource
Number Type Model Name Capacity Status
YL4RUT3ERVR7 6B22 050 DD006 37287 Non-configured
4
Size %Used Status
195754 33.56% Unprotected
55924 40.77% Configured
18643 40.78% Configured
23308 40.78% Configured
27965 40.77% Configured
32623 40.77% Configured
37287 2.88% Removing
3
More details in Chapter 8 in: IBM i 7.1
Technical Overview, SG24-7858-00
http://www.redbooks.ibm.com/redpieces/abstracts/sg
247858.html?Open