Insignia NS-42L550A11 - Manual

32”/37”/42” LCD TV
QUICK SETUP
GUIDE
NS-32L550A11/NS-37L550A11/
NS-42L550A11
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Remote control
and 2 AA
batteries
Remote
control holder
Component
cable
TV stand and screws
Quick Setup Guide
Audio
cable
AC
power
cord
Universal remote control TV codes (for all Insignia TVs manufactured after Jan. 1, 2007)
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
DirectTV
RC23
10463
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
Universal remote control makers and models Set-top box makers and models
Cleaning
cloth
Front features
Installing the stand
1 Carefully place your TV screen face-down
on a cushioned, clean surface to
protect the screen from
damages and scratches.
2 Secure the base to the stand
with the four screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on
a cushioned, clean surface to
protect the screen from
damages and scratches.
2 Remove the four screws holding
the base to the stand.
3 Remove the four screws securing the
stand.
4 Attach the wall-mount bracket to the back of your TV using
screws provided with the wall mount.
Setting up your remote control
1 Remove the battery cover.
2 Insert two AA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries align with the + and – symbols in the
battery compartment.
3 Replace the cover.
Programming your remote control
To program an existing universal remote control to work with your new
Insignia TV, see the table below for common codes. If you have problems
programming your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
To program your universal Insignia remote control to work with other devices
in the home, see your user guide or visit www.insigniaproducts.com.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game console
Using HDMI (best)
Using component (better)
Using S-Video (good)
Using composite (fair)
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the
back of your TV and the RF OUT jack on the antenna.
Power
indicator
Remote
control sensor