iHome IH-A705CB - Manual (Page 2)

setup
verify package contents
1•
slide sides of cooling pad out to fit notebook and place pad under
2•
notebook
adjust feet
to change angle
connect USB cable
3•
connect to a
USB port on
your computer
ON OFF 5V
2A
USB
2.0
connect to
cooling pad
turn on cooling pad
4•
ON OFF 5V
2A
USB
2.0
(optional) connect AC adapter
5•
ON OFF 5V
2A
USB
2.0
plug in to
cooling pad
Your cooling pad with 3 USB ports is also a USB hub and can be used to connect any
device that consumes less than 100 mA (milliamperes)—including digital cameras,
card readers, keyboards, mice, MP3 players, thumb drives and many other handheld
USB devices—without using an AC adapter. When connecting other types of USB
devices that consume more than 100 mA—such as external drives, printers, scanners
or fax machines—connect the included AC adapter.
connect devices
6•
USB
portts
troubleshooting
situation try this
cooling pad
does not
work
Ensure the USB cable is connected properly. •
Ensure the computer is on. •
Ensure the cooling pad power is on. •
USB devices do
not work
Ensure the USB cable is properly connected to the cooling pad •
USB connection and a USB port on your computer.
Ensure the devices are connected properly.
•
Connect the cooling pad to a different USB port. •
Connect the AC adapter, as described above in step 5, if you are •
using high power consumption devices (over 100 mA).
quick start guide
(in your hands right now)
quick start guide
notebook cooling pad
AC adapter
cable storage
compartment
adjustable feet
USB cable