Ingenico I7910 - Manual (Page 2)

1. Ingenico 7910 description:
The i7910 is an indoor, long range wireless GSM/GPRS
point of sale electronic payment terminal designed to
process debit, credit and smart card purchases. It is highly
secured, EMV level 1 and 2 certified.
The i7910 provides fast service, long life battery,
convenience, flexibility and security powered by
Ingenico’s High Security Core and UNICAPT™. It
includes large graphic display and easy loading printer.
Various peripherals can be connected to i7910 through its
RS-232 port. Optional LinkBox offers back-up
connection via dial modem.
1.1. Display:
A 4 line x 16 character LCD graphic display, with a
backlight.
1.2. Keypad:
18 keys, with a back light. The special function keys are:
• Programmable function keys <F1>, <F2> and <F3> for
navigation and access to various i7910 functions and
the system and application menus.
• Paper Feed key is used for a printer paper feed (a few
cm).
• The green <ENTER> key confirms the data entered or
displayed. It also powers on the i7910.
• The red <CAN> key cancels the current function and
returns the terminal to the idle state. It also powers off
the i7910 if it is not connected to the power supply (it
depends of the application running on i7910).
• The yellow <CORR> key corrects invalid data entry.
• The blue <ADMIN> key is used to access the terminal
administration function menu.
1.3. Magnetic Stripe Card Reader:
The i7910 features a bi-directional, 3-track reader located
on the right-hand side. The card can be swiped from the
bottom to the top, or from the top to the bottom.
The magnetic stripe on the card has to face down and point
toward the keypad. The card has to be swiped at uniform
speed and pressure, ensuring that the card remains in contact
with the bottom of the track throughout the entire swipe
action.
1.4. Smart Card Reader:
Insert the smart card horizontally into the slot on the front of
the i7910, the microchip facing up, and leave it in the reader
throughout the transaction.
The i7910 has EMV level 1&2 approvals and complies
with the ISO 7816, Sync and Async T=1 & T=0.
1.5. Printer:
The i7910 integrates a quiet, high speed, “easy-load” style
thermal printer with graphics capability.
1.6. Battery:
Rechargeable and easily replaceable Li-Ion battery pack.
1.7. SIM/SAM Card Connectors:
Two card connectors are located on the bottom of the i7910.
The
SAM (Secure Access Module) supports smart card
chips necessary for applications such as loyalty.
2. Ingenico 7910 Packaging Content:
1. i7910 terminal with Li-Ion battery pack.
2. Thermal printer paper, one roll.
3. Power supply for battery charging.
4. LinkBox and phone cable (optional).
5. ComBox (optional).
6. This installation guide.
Optional accessories for battery charging in a vehicle are
available: Cigarette lighter adapter and power cable for a
direct connection to car battery are also available.
3. i7910 Installation:
i7910 is an indoor, long range wireless terminal powered up
by rechargeable lithium – ion battery.
Before terminal can be used, the SIM card and paper roll
have to be installed and the battery has to be fully charged.
Operating temperature ................................ +5°C to +40°C
Humidity ........................ 20% to 90% without condensation
Storage temperature..................................... -10°C to +60°C
3.1. Installing/Replacing the Printer Paper
When the colored stripe on the paper appears, replace the
paper:
Turn OFF the i7910 before replacing paper roll.
DO NOT touch the printer parts, they can be very hot. Be
aware of the sharp paper cutter.
1. Push the button on the paper compartment cover toward
the back and lift the cover.
2. Remove the empty paper roll and insert the new roll.
Ensure that the paper is protruding from
UNDERNEATH the paper roll:
3. Close the cover, press it until it snaps. Power up the unit
and press the blue “Paper feed” key to verify that paper
feeds properly.
Thermal Paper Specification:
• Single ply thermal sensitive – POS or facsimile grade.
• Basis Weight: (lb/rm 17 ins. X 22 ins. - 500) --- 14.5 ± 5%
(GSM) --- 55
± 5%
• Caliper.............................2.4 ± 0.2 Mils or 60 ± 5 Microns
• Brightness ...........................................................Min. 85%
•
Smoothness (Bekk Minimum) ................................... 300 s
• Roll Width....................2.28 ± 0.040 in (58 mm ± 1.0 mm)
•
Roll Diameter........................... 1.97 in (50 mm) maximum
• Roll Core ID.............................. 0.500 in (13 mm) nominal
• Roll Core OD ............................ 0.625 in (16 mm) nominal
Recommended brands:
KANZAN............... KF50 JUJO ..............AF50KS-E
KOEHLER.... KT55HS01 MITSUBISHI ....... P6402
Thermal paper should NOT be exposed to vinyl, plastics,
adhesives, shrink-wraps, wet-toner copies or certain carbon
papers, office light UV light, high humidity and temperature
(above 65%, 25
°C or 77°F) for long periods of time.
3.2. Installing the Battery
Hold the battery as shown, connectors facing
downwards. Do not touch connectors on the battery or
on the i7910.
Insert the two plastic teeth in the gaps on the i7910 case,
place the battery into the cavity and push it. Press the battery
handle until a click is heard.
3.3. Installing the SIM Card
Two card connectors are located underneath the battery. The
SIM card connector is the white one.
Make sure that i7910 is turned off and that power supply is
disconnected before handling the battery pack.
Do not touch
the contacts on the battery pack or on the i7910.
•
Remove the battery pack.
•
Unlock the SIM connector by sliding the metallic latch
in the direction of the OPEN arrow.
•
Lift the SIM cover upward and insert the SIM card.
•
Swing the cover down and slide the latch into locked
position (the LOCK arrow).
•
Put the battery back in the i7910 handheld .
To remove SIM card - remove battery, unlock the SIM
connector, lift the cover and remove the card.
3.4. Charging the Battery:
The i7910 comes with rechargeable lithium-ion battery. Only
use the battery supplied with your terminal.
Make sure that i7910 is turned off and that power supply is
disconnected before handling the battery pack.
Do not touch
the contacts on the battery pack or on the i7910.
Do not remove battery from i7910 unless installing or
removing SIM card.
Always charge battery at temperatures between 0° and 45°C.
It is important to perform the full battery charge before using
i7910 for the first time – charge the battery without
interruptions until i7910 terminal indicates the end of
charging process (no moving bars on the battery status icon).
To prolong battery life:
- Avoid frequent full discharges. Shallow (partial) discharges
and often charges are preferred. Full discharge and charge is
recommended after every 30-40 short charge/discharge
cycles.
- Protect batteries from high temperatures (for example,
avoid leaving them in a vehicle on a hot summer day).
Navigation keys
Printer
CANCEL
Key
CORR Key
ENTER Key
Paper
Feed Key
Magnetic
Stripe Card
Reader
Smart Card
Reader
SIM card
connector