IBM TOTAL STORAGE DS8000 - Manual (Page 65)

Action
None.
CMUC00139E COMMAND_INFO FlashCopy pair VALUE_0 cannot be created.
Explanation
The FlashCopy pair cannot be created.
Action
Contact IBM technical support for assistance.
CMUC00140I COMMAND_INFO FlashCopy pair VALUE_0 successfully
removed.
Explanation
The command has been invoked without the -cp flag. The specified FlashCopy pair
has been removed successfully.
Action
None.
CMUC00141I COMMAND_INFO Background copy for FlashCopy pair VALUE_0
ended successfully. Relationship successfully removed.
Explanation
The command has been invoked with the -cp and -wait flags. The background copy
for the specified pair ended successfully, and the relationship has been removed.
Action
None.
CMUC00142I COMMAND_INFO Background copy process for FlashCopy pair
PAIR_ID successfully started. The relationship will be removed when
the copy ends.
Explanation
The -cp flag has been used, and the FlashCopy pair is not persistent. The
background copy process for the FlashCopy pair has started successfully. The
FlashCopy volume pair relationship will be withdrawn when the copy process
completes.
Action
None.
Chapter 2. DS command-line interface messages 45