IBM 09N4076 - Manual (Page 41)

Part 2: Appendixes
This section includes information on product specifications, how to solve typical
problems, how to customize the DOS device driver for this option, and how to obtain
help and service. It also includes the product warranty and legal notices.
Appendix A. Product specifications
This appendix includes the the following information:
Physical specifications
Power requirements
Environmental requirements
Drive write/read speeds
Drive performance
Format capabilities
Physical specifications
The physical specifications 11 of the IBM are listed in the following table.
Power requirements
The following table lists the power specifications by voltage level for the IBM. The
power specifications are measured at the drive power connector and are nominal
values.
Physical Specifications:
Height 42 mm (1.7 in.)
Width 149 mm (5.9 in.)
Length 206 mm (8.1 in.)
Weight 1.1 kg (2.4 lb.)
Power Specifications:
At Voltage +12 V dc +5 V dc
Operational current rating is 1.0 A 1.2 A
11 Product-description data represents IBM's design objectives and is provided for comparative
purposes; actual results might vary, based on a variety of factors. This product data does not
constitute a warranty. Data is subject to change without notice.
 Copyright IBM Corp. 2000 2-1