Icom IC-460 - Manual (Page 5)

2
1
ACCESSORIES
1
1
1
ACCESSORIES
■ Accessory attachments
D Flexible antenna
Connect the supplied flexible antenna
to the antenna connector.
CAUTION!
• NEVER HOLD by the antenna
when carrying the transceiver.
• Transmitting without an antenna
may damage the transceiver.
ï Battery pack
To attach the battery pack:
Slide the battery pack on the back of the transceiver in the direc-
tion of the arrow (
q), then lock it with the battery release button.
• Slide the battery pack until the battery release button makes a ‘click’
sound.
To release the battery pack:
Push the battery release button in the direction of the arrow (
w) as
shown below. The battery pack is then released.
q
w
Battery pack
Battery release button
ï Jack cover
Attach the jack cover when the optional speaker-microphone is not
used.
D Belt clip
Attach the belt clip to the back of the transceiver with the supplied
screws.
Supplied screws
q
w
e
r
To attach the jack cover:
q Insert the jack cover into the
[SP MIC] connector.
w Tighten the screw.
To detach the jack cover:
e Unscrew the screw with a
phillips screwdriver.
r Detach the jack cover for the
speaker-microphone connec-
tion.
NEVER release or at-
tach the battery pack
when the transceiver
is wet or soiled. This
may result water or
dust getting into the
transceiver/battery
pack and may result
in the transceiver
being damaged.
!IC-F50_F60 BIIS.qxd 03.9.12 8:49 AM Page 1 (1,1)