Insignia NS-LCD26F NS-CL26C - Manual (Page 15)

16
Insignia NS-LCD26F/NS-LCD32F/NS-CL26C LCD TV
www.insignia-products.com
Customizing DVD player
settings
Using the setup menu
Use your remote control to navigate the setup
menu, where you can configure DVD player
settings.
To open and navigate the Setup menu:
1 Press SETUP on the remote control. The
General Setup Page opens.
2 Press SETUP again. The Preference Page
opens.
3 Press to highlight a selection or
submenu, then press to enter the
submenu or show the options available.
4 Press to select the option/setting you
want, then press PLAY/ENTER to confirm.
5 To exit the Setup menu, press SETUP.
Changing DVD settings
4:3/Ps
4:3/Lb
16:9
Hdcd Off
Last Memory On
On-screen
menu
Options
GENERAL SETUP TV DISPLAY–Sets the aspect ratio of the TV
display.
• 4:3/PS (Pan and Scan - may be used
with external TVs) Widescreen images
are shown on the screen, but with some
parts automatically cut off the ends.
• 4:3/LB (Letter Box - use with internal
TV) Widescreen images are shown on
the screen with black bars on the top
and bottom of the screen.
• 16:9 (may be used with external TVs)
Widescreen images fill the entire
screen.
ANGLE MARK–Lets you turn the Angle option
On or Off. If you set this to On, you can use the
ANGLE button on the remote to select an
alternate viewing angle on the DVD.
OSD Lang.–Lets you select the language for
the On Screen Display (OSD).
CAPTION–Lets you turn the caption On or Off.
SCREEN SAVER–Lets you turn on the screen
saver, which displays when the DVD player is
idle for more than three minutes.
Hdcd–Lets you set Hdcd to "OFF","1X","2X" to
switch the CD play mode between "Normal
CD","HDCD with 44.1K","HDCD with 88.2K". You
can play normal CDs when "HDCD" is set to off.
You can play 44.1K CDs when HDCD is set to
1X, and 88.2K CDs when HDCD is set to 2X to
enhance the audio quality.
Last Memory–Lets you turn the last memory
option On or Off. When set to On, the DVD
player remembers the chapter that you were
viewing when you turn the DVD player off and
starts the DVD at that chapter when you turn
the DVD player back on.
PREFERENCE
(only available
when no disc is in
the player) TV TYPE–Lets you select the TV output type.
Options include:
• MULTI (Auto)–Set to this option
• NTSC
• PAL
PARENTAL–Lets you set Parental Controls for
watching DVDs. Initial password is 1234
Options include:
• Off
• 1 Kid Safe
• 2 g
• 3 Pg
• 4 Pg 13
• 5 Pgr
• 6 R
• 7 Nc 17
• 8 Adult
PASSWORD CHANGE–Lets you change the
password used to set or change Parental
Controls. The initial password is 1234. Use the
number buttons to enter, then confirm the new
password.
Note: If you forget your password, enter 1369.
DEFAULT–Resets all settings (except Parental
Controls and the password) to factory default.
Press ENTER to confirm.